The S-4 Weigh Fill System

The Model S-4 weigh/fill system shares many of the same basic characteristics of the S-5. By using a weigh hopper that drops the entire weighment at once and an electro magnetic vibrator, the S-4 can be up to twice as fast as the S-5, and have greater accuracy at higher speeds and lower net weights.

Example: To run a relatively free-flowing product into a 1lb. package, the product is loaded into the hopper, and the total weight is set at 1lb. After starting the first fill cycle with the foot pedal, the controller will automatically switch into "learn mode" for the first cycle. During this time the controller tests the flow characteristics of the product and decides the best speeds and durations for bulk and dribble. The controller will automatically change the vibratory feed from bulk to dribble and stop the scale at 1lb. The bag is removed and sealed. Each successive container is now filled by placing it under the funnel and depressing the foot pedal.

For more information on the Logical Controller II, click here.

• Overall height: 5'7" (67"), occupies only 24" x 28" of floor space
  
• Hopper Size: 24"x 24" (3.5 cu. ft. product capacity)
  
• Scale Total Weight: 125lbs.
  
• Standard Funnel Size: 2 1/2 OD
  
• Power Requirements: 2 amps, 110 volts 60Hz AC
• Air Requirements: <0.25 cfm air supply at 30 psi
  

• $6,150.00 Standard S-4, F.O.B. Charlotte, VT 05445
• Options:
  
  • Fill Spouts @ $150.00
    
  • Dribble Feed Gate @ $750.00
    
  • 240V 50Hz AC @ $150
  • Stainless Steel Chassis: call for pricing

Download a copy of the S4 Information Sheet (PDF format 355k)